200 SX, (S13) ,, 1809 cc, 1989-92, , Engine Code CA18DET,

Ignition data

200 SX, (S13)
Ignition system type: DI
Ignition coil make/type: Hit/-
Supply voltage: 11 - Volts without ballast resistor
Primary resistance: 0.6-0.8 Ohms
Secondary resistance: 6000-8000 Ohms
Distributor make/type: Nis/-
Contact breaker gap/air: n / a mm
Dwell angle: n / a Deg
Ignition Timing - unleaded: 15
2/850 Deg eng/rpm (without vacuum)
Ignition Timing - leaded: 15
2/850 Deg eng/rpm (without vacuum)
Timing mark location: Pulley
No 1 plug location: Pulley
Firing Order: 1-3-4-2
Spark plug make: NGK
Spark plug type: BCPR6ES-11
Electrode gap: 1.0-1.1 mm

Fuel System

200 SX, (S13)
Fuel type: L/U +Cat
Fuel pump type/pressure: Elec/1.9 bar
Engine idle speed: 850
50 rpm
Fast idle speed: n / a rpm
CO level at idle speed: 2.0 Max [Cat=0.5] Vol %

Engine Data

200 SX, (S13)
Valve clearance - inlet: Hyd
Valve clearance - exhaust: Hyd
Compression pressure: 9.81-11.77 bar
Oil pressure: 3.5-4.1/3000 bar/eng/rpm
Radiator pressure cap: 0.78-0.98 bar/type
Drive belt 1 - size: PV/863 KIB863 mm/type
Drive belt 2 - size: PV/850 KIB850 mm/type

Electrical System

200 SX, (S13)
Alternator output: 60/2500 Amps/eng/rpm
Regulated output: 14.1-14.7 Volts
Battery: 12/60 V/Ah
Starter motor make/type: Ma/M78R

Other data

200 SX, (S13)
Clutch operation type: Hyd
Clutch adjustment: 1-3/Pedal mm
Cambelt failure: Damage
Cambelt Part Number: n / a
Tyre pressures: 2.0(28)f 2.3(34)r bar (psi)