Colt, Lancer 1.3 ,, 1299 cc, , ,1988-90 ,, Engine Code 4G13,

Ignition data

Colt, Lancer 1.3
Ignition system type: El-i
Ignition coil make/type: Mit/F-100
Supply voltage: 4.7 + Volts with ballast resistor
Primary resistance: 1.08-1.32 Ohms
Secondary resistance: 22100-29900 Ohms
Distributor make/type: Mit/T3T62995
Contact breaker gap/air: n / a mm
Dwell angle: n / a Deg
Ignition Timing - unleaded: 4
2/800 +vac Deg eng/rpm (without vacuum)
Ignition Timing - leaded: 4
2/800 +vac Deg eng/rpm (without vacuum)
Timing mark location: Pulley
No 1 plug location: Pulley
Firing Order: 1-3-4-2
Spark plug make: NGK
Spark plug type: BPR 6ES
Electrode gap: 0.7-0.8 mm

Fuel System

Colt, Lancer 1.3
Fuel type: L/U
Fuel pump type/pressure: Mech/0.19-0.26 bar
Engine idle speed: 800
50 rpm
Fast idle speed: n / a rpm
CO level at idle speed: 1.0
0.5 Vol %

Engine Data

Colt, Lancer 1.3
Valve clearance - inlet: 0.15 h mm (hot)
Valve clearance - exhaust: 0.25 h mm (hot)
Compression pressure: 10.4 bar
Oil pressure: 5.0-6.0/- bar/eng/rpm
Radiator pressure cap: 0.75-1.05 bar/type
Drive belt 1 - size: PV/KIB875 mm/type
Drive belt 2 - size: n / a mm/type

Electrical System

Colt, Lancer 1.3
Alternator output: 60/2500 Amps/eng/rpm
Regulated output: 13.9-14.9 Volts
Battery: 12/60 V/Ah
Starter motor make/type: Mit/M3T32592

Other data

Colt, Lancer 1.3
Clutch operation type: Cable
Clutch adjustment: 20-30/Pedal mm
Cambelt failure: Damage
Cambelt Part Number: MD116786
Tyre pressures: 2.0(28)f 2.0(28)r bar (psi)