190E, (201) ,, , 1996 cc, 1988- Engine Code 102.962

Ignition data

190E, (201)
Ignition system type: El-ecu
Ignition coil make/type: Bo/0 221 501 003
Supply voltage: 11.5- Volts without ballast resistor
Primary resistance: 0.3-0.6 Ohms
Secondary resistance: 8000-13000 Ohms
Distributor make/type: Bo/0 237 523 004
Contact breaker gap/air: n / a mm
Dwell angle: n / a Deg
Ignition Timing - unleaded: 8-12/750 +vac Deg eng/rpm (without vacuum)
Ignition Timing - leaded: 8-12/750 +vac Deg eng/rpm (without vacuum)
Timing mark location: Pulley
No 1 plug location: Pulley
Firing Order: 1-3-4-2
Spark plug make: Bosch
Spark plug type: H7DC
Electrode gap: 0.8 mm

Fuel System

190E, (201)
Fuel type: L/U
Fuel pump type/pressure: n / a bar
Engine idle speed: 700-820 rpm
Fast idle speed: n / a rpm
CO level at idle speed: 1.0
0.5 [1989-=0.5 Max] Vol %

Engine Data

190E, (201)
Valve clearance - inlet: Hyd
Valve clearance - exhaust: Hyd
Compression pressure: 8.5-12.0 bar
Oil pressure: 3.0/3000 bar/eng/rpm
Radiator pressure cap: 1.1-1.2/1.3-1.4 bar/type
Drive belt 1 - size: PV/KKB101/188 mm/type
Drive belt 2 - size: PV/KKB197 mm/type

Electrical System

190E, (201)
Alternator output: 55/2500 Amps/eng/rpm
Regulated output: 13.0-14.5 Volts
Battery: 12/55/62 V/Ah
Starter motor make/type: Bo/0.8kW

Other data

190E, (201)
Clutch operation type: Hyd
Clutch adjustment: 150/P.Travel mm
Cambelt failure: n / a
Cambelt Part Number: n / a

Tyre pressures: 2.0(28)f 2.2(31)r bar (psi)