260E, (124) ,, 2599 cc,, 1986-, Engine Code 103.940 ,,

Ignition data

260E, (124)
Ignition system type: El-ecu
Ignition coil make/type: Bo/0 221 501 007
Supply voltage: 11 - Volts without ballast resistor
Primary resistance: 0.36-0.40 Ohms
Secondary resistance: 8000-13000 Ohms
Distributor make/type: Bo/0 237 500 004
Contact breaker gap/air: n / a mm
Dwell angle: n / a Deg
Ignition Timing - unleaded: 7-11/750 +vac Deg eng/rpm (without vacuum)
Ignition Timing - leaded: 7-11/750+vac Deg eng/rpm (without vacuum)
Timing mark location: Pulley
No 1 plug location: Pulley
Firing Order: 1-5-3-6-2-4
Spark plug make: Bosch
Spark plug type: H7DC
Electrode gap: 0.8 mm

Fuel System

260E, (124)
Fuel type: L/U
Fuel pump type/pressure: Elec/5.3-5.5 bar
Engine idle speed: 750
50 rpm
Fast idle speed: n / a rpm
CO level at idle speed: 1.0
0.5 Vol %

Engine Data

260E, (124)
Valve clearance - inlet: Hyd
Valve clearance - exhaust: Hyd
Compression pressure: 13.5-15.5 bar
Oil pressure: 3/3000 bar/eng/rpm
Radiator pressure cap: 0.8-1.0 bar/type
Drive belt 1 - size: PV/KKB217 mm/type
Drive belt 2 - size: n / a mm/type

Electrical System

260E, (124)
Alternator output: 70/2230 Amps/eng/rpm
Regulated output: 13-14.5 Volts
Battery: 12/55 V/Ah
Starter motor make/type: Bo/0 001 110 016

Other data

260E, (124)
Clutch operation type: Hyd
Clutch adjustment: 150/P.Travel mm
Cambelt failure: n / a
Cambelt Part Number: n / a
Tyre pressures: 2.0(28)f 2.2(31)r bar (psi)