Civic, 1300 1335 cc 1980-82 Engine Code EN1/2

Ignition system type: EI-i
Ignition coil make/type: Lu/DLB102
Supply voltage: n / a
Primary resistance: 3.81
0.38 Ohms
Secondary resistance: 8800-13200 Ohms
Distributor make/type: Den/-
Contact breaker gap/air: n / a mm
Dwell angle: n / a Deg
Ignition Timing - unleaded: 2/750 Deg eng/rpm (without vacuum)
Ignition Timing - leaded: 2/750 Deg eng/rpm (without vacuum)
Timing mark location: Pulley
No 1 plug location: N/S/F
Firing Order: 1-3-4-2
Spark plug make: NGK
Spark plug type: BPR5ES
Electrode gap: 0.75 mm

Fuel type: L/U
Fuel pump type/pressure: Mech/0.15-0.20 bar
Engine idle speed: 750
50 rpm
Fast idle speed: 2200-2400 rpm
CO level at idle speed: 3.0 Max Vol %

Valve clearance - inlet: 0.15 h mm (hot)
Valve clearance - exhaust: 0.20 h mm (hot)
Compression pressure: 12 bar
Oil pressure: 3.5-4/3000 bar/eng/rpm
Radiator pressure cap: 1.0 bar/type
Drive belt 1 - size: 9.5x975 KDB975 mm/type
Drive belt 2 - size: n / a mm/type

Alternator output: 35/3500 Amps/eng/rpm
Regulated output: 13.5-14.4 Volts
Battery: 12/45 V/Ah
Starter motor make/type: Hit/12v-0.8kW

Clutch operation type: Hyd
Clutch adjustment: 10-30/Pedal mm
Cambelt failure: Damage
Cambelt Part Number: n / a
Tyre pressures: 1.8(26)f 1.8(26)r bar (psi)

Back to Honda menu