Tempra / 14 /16 /18 /20


Tempra, 1.4, 1372 cc, 1990-, Engine Code 159 A 2000,

Ignition data

Tempra, 1.4
Ignition system type: El-i
Ignition coil make/type: Ma/BAE506D
Supply voltage: n / a
Primary resistance: 0.67-0.81 Ohms
Secondary resistance: 4320-5280 Ohms
Distributor make/type: Ma/SE105C
Contact breaker gap/air: n / a mm
Dwell angle: n / a Deg
Ignition Timing - unleaded: 10/850 Deg eng/rpm (without vacuum)
Ignition Timing - leaded: 10/850 Deg eng/rpm (without vacuum)
Timing mark location: Pulley
No 1 plug location: O/S/F
Firing Order: 1-3-4-2
Spark plug make: Bosch
Spark plug type: WR7DC
Electrode gap: 0.7-0.8 mm

Fuel System

Tempra, 1.4
Fuel type: L/U
Fuel pump type/pressure: Mech/0.18/4000 bar
Engine idle speed: 850  50 rpm
Fast idle speed: n / a rpm
CO level at idle speed: 1.0  0.5 Vol %

Engine Data

Tempra, 1.4
Valve clearance - inlet: 0.4  0.05 c mm (cold)
Valve clearance - exhaust: 0.5  0.05 c mm (cold)
Compression pressure: n / a bar
Oil pressure: 4.6/4000 bar/eng/rpm
Radiator pressure cap: 0.98 bar/type
Drive belt 1 - size: 9.5x865 KDB865 mm/type
Drive belt 2 - size: n / a mm/type

Electrical System

Tempra, 1.4
Alternator output: 55/3500 Amps/eng/rpm
Regulated output: 14.3-14.6 Volts
Battery: 12/40 V/Ah
Starter motor make/type: Ma/E80 0.8kW

Other data

Tempra, 1.4
Clutch operation type: Cable
Clutch adjustment: 126  5/P.Travel mm
Cambelt failure: Damage
Cambelt Part Number: 7576135
Tyre pressures: 2.0(28)f 2.0(28)r bar (psi)

Back to page top or return to menu


Tempra, 1.6, 1581 cc, 1990-, Engine Code 159 A 3000,

Ignition data

Tempra, 1.6
Ignition system type: El-ecu
Ignition coil make/type: Ma/BAE504D
Supply voltage: n / a
Primary resistance: 0.4-0.5 Ohms
Secondary resistance: 4320-5280 Ohms
Distributor make/type: Ma/DT402AX
Contact breaker gap/air: n / a mm
Dwell angle: n / a Deg
Ignition Timing - unleaded: 12/950 Deg eng/rpm (without vacuum)
Ignition Timing - leaded: 12/850 Deg eng/rpm (without vacuum)
Timing mark location: Pulley
No 1 plug location: O/S/F
Firing Order: 1-3-4-2
Spark plug make: Bosch
Spark plug type: WR7DC
Electrode gap: 0.7-0.8 mm

Fuel System

Tempra, 1.6
Fuel type: L/U
Fuel pump type/pressure: Mech/0.18/4000 bar
Engine idle speed: 850  50 rpm
Fast idle speed: n / a rpm
CO level at idle speed: 1.0  0.5 Vol %

Engine Data

Tempra, 1.6
Valve clearance - inlet: 0.40 c mm (cold)
Valve clearance - exhaust: 0.50 c mm (cold)
Compression pressure: n / a bar
Oil pressure: 4.6/4000 bar/eng/rpm
Radiator pressure cap: 0.98 bar/type
Drive belt 1 - size: PV/K5B925 mm/type
Drive belt 2 - size: n / a mm/type

Electrical System

Tempra, 1.6
Alternator output: 55/3500 Amps/eng/rpm
Regulated output: 14.3-14.6 Volts
Battery: 12/40 V/Ah
Starter motor make/type: Ma/E80-12V-1kW

Other data

Tempra, 1.6
Clutch operation type: Cable
Clutch adjustment: 126  5/P.Travel mm
Cambelt failure: Damage
Cambelt Part Number: 7576135
Tyre pressures: 2.0(28)f 2.0(28)r bar (psi)

Back to page top or return to menu


Tempra, 1.8 ie, 1756 cc, 1990-, Engine Code 159 A 4000

Ignition data

Tempra, 1.8 ie
Ignition system type: El-ecu
Ignition coil make/type: Ma/BAE504DK
Supply voltage: n / a
Primary resistance: 0.4-0.5 Ohms
Secondary resistance: 4320-5280 Ohms
Distributor make/type: Ma/DT453D
Contact breaker gap/air: n / a mm
Dwell angle: n / a Deg
Ignition Timing - unleaded: 15  2/820 Deg eng/rpm (without vacuum)
Ignition Timing - leaded: 15  2/820 Deg eng/rpm (without vacuum)
Timing mark location: Pulley
No 1 plug location: O/S/F
Firing Order: 1-3-4-2
Spark plug make: Bosch
Spark plug type: WR7DC
Electrode gap: 0.6-0.7 mm

Fuel System

Tempra, 1.8 ie
Fuel type: L/U
Fuel pump type/pressure: Elec/3.0  0.2 bar
Engine idle speed: 850  50 rpm
Fast idle speed: n / a rpm
CO level at idle speed: 1.5  0.5 Vol %

Engine Data

Tempra, 1.8 ie
Valve clearance - inlet: 0.40-0.45 c mm (cold)
Valve clearance - exhaust: 0.45-0.50 c mm (cold)
Compression pressure: n / a bar
Oil pressure: 4.6/4000 bar/eng/rpm
Radiator pressure cap: 0.98 bar/type
Drive belt 1 - size: PV/K5B101 mm/type
Drive belt 2 - size: n / a mm/type

Electrical System

Tempra, 1.8 ie
Alternator output: 63/3500 Amps/eng/rpm
Regulated output: 14.3-14.6 Volts
Battery: 12/44 V/Ah
Starter motor make/type: Ma/E70R 1.4kW

Other data

Tempra, 1.8 ie
Clutch operation type: Cable
Clutch adjustment: 126  5/P.Travel mm
Cambelt failure: Damage
Cambelt Part Number: 7604883
Tyre pressures: 2.2(31)f 2.2(31)r bar (psi)

Back to page top or return to menu


Croma, 2.0 CHT, 1995 cc, 1986-, Engine Code 154A1/C2.000,

Ignition data

Croma, 2.0 CHT
Ignition system type: El-i/El-ecu
Ignition coil make/type: Ma/BAE 504D
Supply voltage: n / a
Primary resistance: 0.75/0.45 Ohms
Secondary resistance: 8460-10340 Ohms
Distributor make/type: Marelli
Contact breaker gap/air: n / a mm
Dwell angle: n / a Deg
Ignition Timing - unleaded: 10  2/750 Deg eng/rpm (without vacuum)
Ignition Timing - leaded: 10  2/750 Deg eng/rpm (without vacuum)
Timing mark location: Pulley
No 1 plug location: O/S/F
Firing Order: 1-3-4-2
Spark plug make: Bosch
Spark plug type: WR6DC
Electrode gap: 0.6-0.7 mm

Fuel System

Croma, 2.0 CHT
Fuel type: L/U
Fuel pump type/pressure: Mech/0.24-0.29 bar
Engine idle speed: 750  50 rpm
Fast idle speed: n / a rpm
CO level at idle speed: 1.0-2.0 Vol %

Engine Data

Croma, 2.0 CHT
Valve clearance - inlet: 0.35  0.04 c mm (cold)
Valve clearance - exhaust: 0.40  0.04 c mm (cold)
Compression pressure: n / a bar
Oil pressure: 3.5-5.0/- bar/eng/rpm
Radiator pressure cap: 0.98 bar/type
Drive belt 1 - size: 9.5x1100 KDB110 mm/type
Drive belt 2 - size: n / a mm/type

Electrical System

Croma, 2.0 CHT
Alternator output: 45/2000 [89-=55/3500] Amps/eng/rpm
Regulated output: 13.7-14.3 Volts
Battery: 12/45 V/Ah
Starter motor make/type: Bo/0 001 211 536

Other data

Croma, 2.0 CHT
Clutch operation type: Cable
Clutch adjustment: 12 Above B.Ped mm
Cambelt failure: Damage
Cambelt Part Number: 5889252
Tyre pressures: 2.0(28)f 2.0(28)r bar (psi)

Back to page top or return to menu


Croma, 2.0 i.e, 1995 cc, 1986-89, Engine Code 834B.000

Ignition data

Croma, 2.0 i.e
Ignition system type: El-ecu
Ignition coil make/type: Ma/BAE 209B/BK
Supply voltage: n / a
Primary resistance: 0.31-0.38 Ohms
Secondary resistance: 3330-4070 Ohms
Distributor make/type: Ma/DT808 UAX
Contact breaker gap/air: n / a mm
Dwell angle: n / a Deg
Ignition Timing - unleaded: n / a Deg eng/rpm (without vacuum)
Ignition Timing - leaded: 10  2/800 Deg eng/rpm (without vacuum)
Timing mark location: Pulley
No 1 plug location: O/S/F
Firing Order: 1-3-4-2
Spark plug make: Bosch
Spark plug type: WR6DC
Electrode gap: 0.6-0.7 mm

Fuel System

Croma, 2.0 i.e
Fuel type: L
Fuel pump type/pressure: Elec/3.0  0.2 bar
Engine idle speed: 790  50 rpm
Fast idle speed: n / a rpm
CO level at idle speed: 1.0-2.0 Vol %

Engine Data

Croma, 2.0 i.e
Valve clearance - inlet: 0.40  0.04 c mm (cold)
Valve clearance - exhaust: 0.48  0.04 c mm (cold)
Compression pressure: n / a bar
Oil pressure: 3.5-5.0/- bar/eng/rpm
Radiator pressure cap: 0.98 bar/type
Drive belt 1 - size: 9.5x1100 KDB110 mm/type
Drive belt 2 - size: n / a mm/type

Electrical System

Croma, 2.0 i.e
Alternator output: 40/2000 Amps/eng/rpm
Regulated output: 13.7-14.3 Volts
Battery: 12/45 [AT=12/60] V/Ah
Starter motor make/type: Bo/0 001 108 025

Other data

Croma, 2.0 i.e
Clutch operation type: Cable
Clutch adjustment: 12 Above B.Ped mm
Cambelt failure: Damage
Cambelt Part Number: 5889252
Tyre pressures: 2.0(28)f 2.0(28)r bar (psi)

Back to page top or return to menu