Tipo / 16 / 18 / 20


Tipo, 1600, 1580 cc, 1990-92, Engine Code 159 A3.000,

Ignition data

Tipo, 1600
Ignition system type: El-ecu
Ignition coil make/type: Ma/BAE 504D
Supply voltage: 11 - Volts without ballast resistor
Primary resistance: 0.4-0.5 Ohms
Secondary resistance: 4320-5280 Ohms
Distributor make/type: Ma/DT 402BX
Contact breaker gap/air: n / a mm
Dwell angle: n / a Deg
Ignition Timing - unleaded: 12/850 Deg eng/rpm (without vacuum)
Ignition Timing - leaded: 12/850 Deg eng/rpm (without vacuum)
Timing mark location: Pulley
No 1 plug location: O/S/F
Firing Order: 1-3-4-2
Spark plug make: Champion
Spark plug type: RN7YCC
Electrode gap: 0.8 mm

Fuel System

Tipo, 1600
Fuel type: L/U
Fuel pump type/pressure: Mech/0.18 bar
Engine idle speed: 850  50 rpm
Fast idle speed: 1300  50 rpm
CO level at idle speed: 1.0  0.5 Vol %

Engine Data

Tipo, 1600
Valve clearance - inlet: 0.40  0.05 c mm (cold)
Valve clearance - exhaust: 0.50  0.05 c mm (cold)
Compression pressure: n / a bar
Oil pressure: 3.4-4.9 bar/eng/rpm
Radiator pressure cap: 0.98 bar/type
Drive belt 1 - size: 9.5x850 KDB850 mm/type
Drive belt 2 - size: 9.5x737 KDB737 mm/type

Electrical System

Tipo, 1600
Alternator output: 50/3500 Amps/eng/rpm
Regulated output: 14.0-14.3 Volts
Battery: 12/40 V/Ah
Starter motor make/type: Bo/0 001 208 211

Other data

Tipo, 1600
Clutch operation type: Cable
Clutch adjustment: 145  50 P.Travel mm
Cambelt failure: Damage
Cambelt Part Number: 7576135
Tyre pressures: 2.0(28)f 1.9(27)r bar (psi)

Back to page top or return to menu


Tipo, 1600 ie, 1580 cc, 1990-, Engine Code 159 A3.046,

Ignition data

Tipo, 1600 ie
Ignition system type: El-ecu
Ignition coil make/type: Ma/BAE 504D
Supply voltage: 11 - Volts without ballast resistor
Primary resistance: 0.4-0.5 Ohms
Secondary resistance: 4320-5280 Ohms
Distributor make/type: Ma/DT 402G
Contact breaker gap/air: n / a mm
Dwell angle: n / a Deg
Ignition Timing - unleaded: 4  2/800 Deg eng/rpm (without vacuum)
Ignition Timing - leaded: n / a Deg eng/rpm (without vacuum)
Timing mark location: Pulley
No 1 plug location: O/S/F
Firing Order: 1-3-4-2
Spark plug make: Champion
Spark plug type: RN7YCC
Electrode gap: 0.8 mm

Fuel System

Tipo, 1600 ie
Fuel type: U Cat
Fuel pump type/pressure: Elec/1.1  0.1 bar
Engine idle speed: 800-900 rpm
Fast idle speed: n / a rpm
CO level at idle speed: 0.5 Max Vol %

Engine Data

Tipo, 1600 ie
Valve clearance - inlet: 0.40  0.05 c mm (cold)
Valve clearance - exhaust: 0.50  0.05 c mm (cold)
Compression pressure: n / a bar
Oil pressure: 3.4-4.9 bar/eng/rpm
Radiator pressure cap: 0.98 bar/type
Drive belt 1 - size: PV/KIB888 mm/type
Drive belt 2 - size: n / a mm/type

Electrical System

Tipo, 1600 ie
Alternator output: 58/3500 Amps/eng/rpm
Regulated output: 14.3-14.6 Volts
Battery: 12/55 V/Ah
Starter motor make/type: Den/1.0kW

Other data

Tipo, 1600 ie
Clutch operation type: Cable
Clutch adjustment: 145  50 P.Travel mm
Cambelt failure: Damage
Cambelt Part Number: 7576135
Tyre pressures: 2.0(28)f 1.9(27)r bar (psi)

Back to page top or return to menu


Tipo, 1.8 ie, 1756 cc, 1990-, Engine Code 159 A4.000,

Ignition data

Tipo, 1.8 ie
Ignition system type: El-ecu
Ignition coil make/type: Ma/BAE 504DK
Supply voltage: 11 - Volts without ballast resistor
Primary resistance: 0.4-0.5 Ohms
Secondary resistance: 4320-5280 Ohms
Distributor make/type: Ma/DT 453E
Contact breaker gap/air: n / a mm
Dwell angle: n / a Deg
Ignition Timing - unleaded: 15  2/820 Deg eng/rpm (without vacuum)
Ignition Timing - leaded: 15  2/820 Deg eng/rpm (without vacuum)
Timing mark location: Pulley
No 1 plug location: O/S/F
Firing Order: 1-3-4-2
Spark plug make: Bosch
Spark plug type: WR6DC
Electrode gap: 0.6-0.7 mm

Fuel System

Tipo, 1.8 ie
Fuel type: L/U +Cat
Fuel pump type/pressure: Elec/3.0  0.2 bar
Engine idle speed: 820  50 rpm
Fast idle speed: n / a rpm
CO level at idle speed: 1.5  0.5 Vol %

Engine Data

Tipo, 1.8 ie
Valve clearance - inlet: 0.40  0.05 c mm (cold)
Valve clearance - exhaust: 0.40  0.05 c mm (cold)
Compression pressure: n / a bar
Oil pressure: 4.6/4000 bar/eng/rpm
Radiator pressure cap: 0.98 bar/type
Drive belt 1 - size: n / a mm/type
Drive belt 2 - size: n / a mm/type

Electrical System

Tipo, 1.8 ie
Alternator output: 58/3500 Amps/eng/rpm
Regulated output: 14.0-14.3 Volts
Battery: 12/55 V/Ah
Starter motor make/type: Den/0.6kW

Other data

Tipo, 1.8 ie
Clutch operation type: Cable
Clutch adjustment: 145  50 P.Travel mm
Cambelt failure: Damage
Cambelt Part Number: 7604883
Tyre pressures: 2.2(31)f 2.2(31)r bar (psi)

Back to page top or return to menu


Tipo, 2.0 ie, 1995 cc, 1990-, Engine Code 159 A5.046,,

Ignition data

Tipo, 2.0 ie
Ignition system type: El-ecu
Ignition coil make/type: Ma/BAE 504DK
Supply voltage: 11 - Volts without ballast resistor
Primary resistance: 0.4-0.5 Ohms
Secondary resistance: 4320-5280 Ohms
Distributor make/type: Ma/DT 453E
Contact breaker gap/air: n / a mm
Dwell angle: n / a Deg
Ignition Timing - unleaded: 9  2/800 Deg eng/rpm (without vacuum)
Ignition Timing - leaded: n / a Deg eng/rpm (without vacuum)
Timing mark location: Pulley
No 1 plug location: O/S/F
Firing Order: 1-3-4-2
Spark plug make: Champion
Spark plug type: RN7YCC
Electrode gap: 1.0 mm

Fuel System

Tipo, 2.0 ie
Fuel type: U Cat
Fuel pump type/pressure: Elec/3.0 bar
Engine idle speed: 800-900 rpm
Fast idle speed: n / a rpm
CO level at idle speed: 0.5 Max Vol %

Engine Data

Tipo, 2.0 ie
Valve clearance - inlet: 0.40-0.45 c mm (cold)
Valve clearance - exhaust: 0.45-0.50 c mm (cold)
Compression pressure: n / a bar
Oil pressure: 3.4-4.9 bar/eng/rpm
Radiator pressure cap: 0.98 bar/type
Drive belt 1 - size: 4PK 888 mm/type
Drive belt 2 - size: n / a mm/type

Electrical System

Tipo, 2.0 ie
Alternator output: 58/3500 Amps/eng/rpm
Regulated output: 14.3-14.6 Volts
Battery: 12/60 V/Ah
Starter motor make/type: Ma/E70R

Other data

Tipo, 2.0 ie
Clutch operation type: Cable
Clutch adjustment: 146/P.Travel mm
Cambelt failure: Damage
Cambelt Part Number: 7774591
Tyre pressures: 2.2(31)f 2.1(30)r bar (psi)

Back to page top or return to menu


Tipo, 2.0 ie 16V, 1995 cc, 1991-, Engine Code 160 A8.046

Ignition data

Tipo, 2.0 ie 16V
Ignition system type: El-ecu
Ignition coil make/type: Ma/BAE 504 DK
Supply voltage: 11 - Volts without ballast resistor
Primary resistance: 0.4-0.5 Ohms
Secondary resistance: 4320-5280 Ohms
Distributor make/type: Ma/DT 453F
Contact breaker gap/air: n / a mm
Dwell angle: n / a Deg
Ignition Timing - unleaded: 10  3/900 Deg eng/rpm (without vacuum)
Ignition Timing - leaded: n / a Deg eng/rpm (without vacuum)
Timing mark location: Pulley
No 1 plug location: O/S/F
Firing Order: 1-3-4-2
Spark plug make: Champion
Spark plug type: RN7YCC
Electrode gap: 0.85-0.95 mm

Fuel System

Tipo, 2.0 ie 16V
Fuel type: U Cat
Fuel pump type/pressure: Elec/3.0  0.2 bar
Engine idle speed: 900  30 rpm
Fast idle speed: n / a rpm
CO level at idle speed: 0.5 Vol %

Engine Data

Tipo, 2.0 ie 16V
Valve clearance - inlet: 0.45  0.03 c mm (cold)
Valve clearance - exhaust: 0.50  0.03 c mm (cold)
Compression pressure: n / a bar
Oil pressure: 3.4-4.9 bar/eng/rpm
Radiator pressure cap: 0.98 bar/type
Drive belt 1 - size: n / a mm/type
Drive belt 2 - size: n / a mm/type

Electrical System

Tipo, 2.0 ie 16V
Alternator output: 35/3500 Amps/eng/rpm
Regulated output: 14.0-14.3 Volts
Battery: 12/60 V/Ah
Starter motor make/type: Bo/0 001 211 536

Other data

Tipo, 2.0 ie 16V
Clutch operation type: Cable
Clutch adjustment: 145  50 P.Travel mm
Cambelt failure: Damage
Cambelt Part Number: 7774591
Tyre pressures: 2.5(36)f 2.2(32)r bar (psi)

Back to page top or return to menu